Hagar
timers and manuals
Hagar
Contact Hagar
Oval-1 is Monday
Oval-2 is Tuesday
The Oval is located at 12:00 noon for that day
4 is for 4 am
16 is for 4 pm
Each day has 12 segments on dial
Segment-in for ON
Segment-out for OFF
Push segments down and outward
Set timer functions by pushing segements down and out or up and inward.
How to set analog timers
To check function of timer, manually rotate timer dial clockwise and watch Load turn on-off. To set current time, rotate dial until current time lines up with arrowhead located on inner dial.
| Hagar-31500-series Hagar-31510 manual Hagar-31514 manual Hagar-31515 manual Hagar-31570 manual Hagar-31574 manual Hagar-31575-7-day manual Wall switch timer |
 |
How
to wire Hagar in-wall timer Black wire connects to black L1 Hot wire White wire connects to Neutral/ or L2 in case of 240V Red wire connects to wire going to Load Slide switch: 0 or ON is permanently ON I or OFF is permanently OFF Auto is for running programs Dial rotates continuously no matter which switch setting |
Hagar catelog
Modular_Automation_devices
 Some timers have battery |
 Larger image |
 |
Vertical analog dial. Larger EH 010 image How to set analog timers Max capacity 900 watts incandescent |
Hagar 1" wide
Hagar EH 010 EH 011 manual
See EH 10 image
How to set analog timers
EH134 EH135 EH136 EH137
by experimenting with features
Hagar 3" wide
EH110 EH111 EH171 manual
Hagar 5" wide
EH191 manual
Surface mount Hagar analog timer
EH710 EH711 EH770 manual
EH710 EH711 EH770 EH771 manual
EH715 EH716 manual
24-hour EG010 manual
7-day EG071 manual
EG100 manual
1 channel 7-day, 24 programs, 1 minute minimum on-off, 24-hour program reserve
EG103E manual
1 channel, 7 day, 56 programs, 1 minute minimum
1 second impulse
With key
EG110 manual
EG170 manual
EG171 manual
EG172 manual
EG210 manual
EG270 manual
Larger image
Push segments down and outward to set ON-OFF times
How to set analog timers
Sell sheet
Module 16000
Module 13000
Flash compact
http://controls.hager.com/index.php?scr=800&id=1342
 Hagar monomat analog timer Larger image |
Larger image |
Monomat user manual 24 hour
15 minute times with
Monomat user manual 7day
1 hr 45 minute times
 Larger image How to set analog timers |  Larger image |
120V 240V 24V
Hagar Micromat manual
 Hagar Monotron 100 Larger image | |  Larger image |
Hagar Monotron 107
Hagar Monotron 107P
Hagar Monotron 124
Larger image
Monotron modules
Sell sheet
Possible manuals:
Hagar Monotron 107
Hagar Monotron 107P
Hagar Monotron 124
Larger image
Sell sheet
Possible manuals:
Hagar Monotron 200 single channel manual
Hagar Montron 200 2-channel manual
Hagar Monotron 200
Larger image
Hagar Monotron 200 single channel manual
Hagar Montron 200 2-channel manual
Hagar Monotron 300
Larger image
Hagar Monotron 300 1 channel
Hagar Monotron 300-2-channel
Hagar Monotron 300 CS
Hagar Monotron 300 CS-2-channel
Hagar Monotron 400
Larger image
4-channel, 7-day with impulse
Monotron 400 Sell sheet
Monotron 400 Manual with wiring and programming
Hagar Meditiatron 1 & 2 radio synchronized
Larger image
2 or 4 channel
With programming key
Medititatron Sell sheet
Hagar Meditiatron 1
Hagar Meditiatron 2
 Intermatic |
 Aube |
GE |
 ETW350 |
 ST01C |
 Tork |
 Woods |
 EJ500 |
Sylvania
|
 Leviton |
 Utilitec |
 Power pack |
Hagar 135 manual
Rotate dial clockwise to set current time
Segments located around dial are pulled out and down.
Or segments are pushed inward.
When segments are out and down, NC terminals 5 & 6 are activated.
When segments are inward, timer turns on and NO terminals 4 & 5 are activated.
To test segments, wire the timer and then manually rotate timer dial to see when Load is activated.
Timer can be wired different ways.
Load wires connect to either terminal 4 or 6
240V Hot wires connect to terminals 2 & 3, and this powers the clock.
Hot wire jumper is added from terminal 3 to terminal 5.
Max 16Amp make these timers lightweight, so they are suited for controlling contactors.
