is a self-help website
|Figure volts amps watts for water heater||9 Ways to save with a water heater||Do-it-yourself||
How to program Utilitec 0155671 - Utilitec TE06WHBL
Timer has 2 grounded outlets
Read written instructions
for programming Utilitec 0155671|
Press reset button with paper clip to reset and clear timer
Plug timer in for 1 hour to charge internal battery.
After battery is charged, timer can be unpluged for programming.
Kitchler timer uses AA battery. Check that battery polarity is correct.
Check outlet with circuit analyzer if you have problems with timers not working.
Timer is rated for 1875Watts incandescent
Incandescent (tungsten) means timer is not made for CFL ballast, althought this timer DOES work for CFL since I have CFL bulb connected to my Utilitec 0155671.
To set current time:
Press and hold clock button Keep holding clock button until settings are made.
Press day until black triangle lines up with current day symbols that are printed on timer.
MO TU WE TH FR SA SU
Press Hour until current hour and am pm show. Pay attention to am and pm on left side of display.
Press min until current minutes show
Release clock button.
Current time should display, and seconds will be blinking.
Write out programming schedule to avoid conflicts in programming that cause timer not to function as expected.
Timer can be set for 1 to 8 programs. You can set 1 program. or all 8.
For example: program1 program2 ... through program8
Each program has ON time and OFF time.
Each ON time is set for day, hour and minute, and then each OFF time is set for day, hour and minute.
example Step1) Set program1 ON time > with day hour and minute
example Step2) Set program1 OFF time > with day hour and minute
example Step3) Set program2 ON time, etc
How to program:
Step1) Press PROG button until ON and 1 appear in display
This is program1 ON
Press day button to choose day or blocks of days you want program1 to turn ON.
Keep pressing day button to cycle through the choices.
Once day is selected, go directly to the hour button.
Press hour to choose hour for program1 ON, pay attention to am and pm
Then go directly to the minute button. Press min to choose minute for program1 ON
Step2) Press PROG button until OFF and 1 appear on display
This is program1 OFF
Press day button to choose day or blocks of days you want program1 to turn OFF
Once day is selected, go directly to the hour button.
Press hour to choose hour for program1 OFF, pay attention to am and pm
Then go directly to the minute button. Press min to choose minute for program1 OFF
Step3) Set program2 thru program8
Press PROG button until ON and 2 appear on display
This is program2 ON
repeat steps and set up to 8 programs.
When programming is complete, press clock button and current time displays.
To return to programming, or to check or change programs, press PROG button and repeat steps above.
At this point, the timer is operational. DO NOT PRESS the manual override button.
There is no requirement to set Manual override. People report problems and confusion with override.
Press manual override for 4 choices: Auto ON, Auto OFF, Manual ON, Manual OFF.
Auto ON, means lamp turns ON immediately and programming resumes at next set point.
Auto OFF, means lamp turns OFF immediately and programming resumes at next set point.
Manual ON or Manual OFF is used as ordinary on-off switch
This timer can also be used for random on-off times, and as a countdown timer.
Random timer gives lived-in appearance while on vacation. Countdown turns lamp off after set length of time.
Random and countdown features explained in pdf manual
Make sure lamp is turned ON and that bulb is good.
Check outlet for power, and check circuit breaker.
Try timer on different lamp and different outlet.
Check that correct time is set, and that each ON time has OFF time.
Check programming for conflicts and overlaps.
For example ON 8:00 pm Tuesday and OFF 10:00 pm All-days-of-week will cause timer not to operate.
Test outlet with cheap circuit analyzer to ensure that issues are not causing problem with timer electronics.
Buy another timer at Lowes or Target and return defect timer in new package
|More Utilitec timers|
Utilitec 0331645 manual
Utilitec TE08WHBL manual
Utilitec 0155671 manual
Utilitec TH06WHBL manual
Utilitec 0149289 manual
Utilitec 0358708 manual
24 hour timer/ 2 programs per day
Two timers fit same duplex outlet
Stanley 38424 at Amazon
Stanley 38425 at Amazon
Stanley TM213 at Amazon
Woods 50007 at Amazon
Westek at Amazon
Westek 2-pack at Amazon
Westek TE22DHB manual
Westek TE02DHB manual
Westek TE06WHB manual
Westek TE05WHBL manual
Westek TE55WHB manual
Westek TE08WHBL manual
Westek TM07DHBL manual
Westek TM07WHBL manual
Westek TM77CHB manual
Woods 50007 manual
Stanley 58424 bar timer manual
timer for safety. |
Plug timer in. No programming. Push buton and set for 1 hour so iron is not accidently left ON.
Simple touch at Amazon
See all the Woods timers
All countdown timers
Intermatic trippers and parts
|Intermatic T1906 and T1905
||Intermatic T-101 T103 T104
||Paragon timers and manuals
||Westek box timers
EH40 and WH40
||Tork timers and manuals
|Wire GE 15207 timer
How to set analog timers
||Pool timers and manuals
GE box timers
|Intermatic EH10 timer
|Intermatic sprinkler timers
Melnor water timer manuals
Gardena water timer manuals
Orbit water timer manuals
9+ ways to save with water heater
Do it yourself water heater
Cost to run water heater
Gas control valves
How to wire switches
Remove rusted element
Leaking water heater
Flooded water heater
my associate links:|
50 gallon Gas water heaters at Amazon
40 gallon gas water heaters at Amazon
50 gallon Electric water heaters at Amazon
40 gallon electric water heaters at Amazon
Hybrid / heat pump/ water heaters at Amazon
Troubleshoot gas water heater
Troubleshoot electric water heater
My response might end up in spam folder, check email folders
Follow newest idea on twitter