How
to program Gardena C1060
Profi C1060 Solar timer
NEW:: Gardena C1060 profi manual English
Below, the Gardena C1060 manual was translated using Google
translate: part of manual was in French
and
part in Italian |
Gardena C1060 manual in Italian
More
Gardena manuals
|
|
 |
Gardina C1060 timer for
garden watering
Notice the release button located on underside.
Push release to install battery
After cover is loose, you can carry unit indoors to set programs
Timer connects to water spigot or to pipe thread
Garden drip connects on bottom
|
 |
Buttons
for programming timer
4) Manual override > purpose is to reverse whatever program is
working at time
1) 
Button lets you scroll through menu options
2) OK button confirms each program setting
3) Press Menu button to see menu choices |
 |
On
screen display
Cursor 
5) Shows days of the week MO TU etc
6) Shows PROGram that is active now
7) Shows special functions when program connected to automatic shift
[unclear]
8) Time: the Hour or Minute flashes when you are setting time
9) The word "Start" flashes
10) Shows AM or PM when you are setting time
11) Hours and minutes flash when setting time
12) RUN-TIME is length of watering time
13) 3rd is water cycle every 3rd day <> 2nd is watering
every 2nd day
14) %Run-Time
15) Error when using Special function from #7 [unclear what this means]
16) BATT flashes when battery is low > watering programs will
pause
17) Shows when watering programs are inactive |
• Level 1: Normal display
• Level 2: The current time and day
• Level 3: Selection of irrigation programs
• Level 4: %Run Time |
During programming, you can select
another display
level by pushing Menu key. All programs that have been
confirmed by pressing OK
button will show.
|
Make
schedule of 1-6 programs before programming
As a general rule, timers do not operate as expected when timer
schedules
overlap. |
 |
Set
current time
Battery is installed > display will not show without battery |
 |
Press #3 Menu until
Level 2 shows
• Level
2: The current time and day
"Time" flashes on hour
Press
to change current Hour
Press OK to confirm and set hour
Press
to change Minute
Press OK to confirm and set minute
Press
to change Day
Press OK to confirm and set day |
 |
Display
changes to operating
• Level 3
• Level
3: Selection of irrigation programs
Blinking
cursor
appears under the number 1
You can set 6 different programs
The number 1 means the first one of those 6 programs |
Setting
irrigation programs
Press Menu button to display • Level 3: Selection
of irrigation programs |
| Introduction
|
Each
program must have:
> Start time (hour, minute)
> Duration or Run-time
> Days (every 2nd day or every
3rd day)
Move cursor
with
button |
Special function is unclear |
Computer
can be set for automatic watering depending on moisture in soil.
This the 'special' function shown on display
I could
not translate 'special function' part of the manual very
well and will not include instructions until I have time to study
manual a bit more |
 |
Press
Menu button to display • Level 3:
Move cursor
with
button until program1 or program2 or program3 thru
6 displays
We
are going to work on Program 3 |
|
 |
The
display flashes 'Start Time'
The Hour shows
This will be the start time Hour for Program 3
> Use
button to scroll to the desired hour
> Press OK button to confirm |
 |
The
display flashes 'Start Time'
The Minutes shows
This will be the start time Minutes for Program 3
> Use
button to scroll to the desired minutes
> Press OK button to confirm |
|
 |
The
display flashes 'RUN-Time'
The Hour shows
This will be the amount of time you want Program 3 to run
> Use
button to scroll to the desired hours
> Press OK button to confirm |
 |
The
display flashes 'RUN-Time'
The Minutes shows
This will be the amount of time you want Program 3 to run
> Use
button to scroll to the desired minutes
> Press OK button to confirm |
|
 |
Now
the display shows a blinking cursor at
3rd
This means watering every third day
> Use
button to scroll to choose 3rd or 2nd
> Press OK button to confirm
|
 |
Now
the display shows a blinking cursor at
Mo for Monday
> Use
button to scroll to the desired days
> Two days will show if you selected 2nd in previous step
> Example on left show 2 days are Mo Monday and Fr Friday
> Press OK button to confirm
If you want to water every day of the week, use
button to select Mo and press OK, and then select Tu and press OK, and
then We and OK until full week is OKed, and then the cursor will
disappear |
At
this point, the display returns to Step 3 above
You can select Program 2 or Program 4 etc and repeat steps |
|
|
Once
all the data is entered into Program 6, the display automatically goes
to
• Level 4 activation of programs
You can enter • Level 4 at any time by pressing Menu
button
• Level 4: %Run Time [I am unclear about % run time]
• Level 4 also lets you enter data for % of run
time
If I figure it out, I will extend the instructions |
Download
Gardena C1060 in French/Italian
First part of manual in French
Second part of manual in Italian |
|
|
To run the programs
Use Menu button until • Level 1 shows |
|
To
reset timer and clear all programming:
Hold down
button and OK button for 2 seconds
|
