Search waterheatertimer.org /
all results
|
Kichler transformers and manuals |
|
|||||||||||||
1) Select transformer wattage before buyingSelect a transformer that matches as closely as possible to the total lamp wattage.For example, if you have 11 fixtures all rated at 24.4 watts, you will need a 300 watt (VA) transformer (11 x 24.4 = 268.4 watts). Generally, the total lamp load should not be less than one-third the transformers wattage rating, nor exceed its maximum wattage capacity. If your total wattage is too high, either divide the load between two transformers, or use a more powerful transformer 2) You can use any ordinary 3-prong plug-in timer to control transformerA) Unplug short power cord located on front of transformer.B) Plug ordinary 120Volt timer into receptacle where short cord was plugged. C) Plug short power cord into timer D) Set timer following instructions provided with timer General Kichler manual 3) Or,,, You can use Kichler photoeye control transformer (instead of timer)15565BK manual/ pdf15534BK remote photocell manual/ pdf |
|||||||||||||
4) Connect low-voltage wires to Kichler transformerKichler transformers have selectable 12-13-14-15 volt output.To select voltage, connect 1 wire to COM terminal, and connect other wire to choice of 12 thru 15 volts Output selection depends on total watts of lights, size and length of wire going to lights, and household voltage output. If household voltage is low (80-90% rated value), use 15V output. If total watts of lights is less than half transformer rating, use 13V For brighter lights use 15V. For longer wire going to lights, use 15V Total watts of lights should not be less than 1/3 transformer rating. Nor exceed transformer rating. For models with timer outlet... plug in ordinary 2-prong wall timer For models with photcell outlet, buy 15565BK at Amazon For remote photocell, 10' cord, buy 15534BK at Amazon 5) Plug transformer into 120Volt outletTimer plugs into 120Volt outletMust use GFCI protected outlet How to wire GFCI |
Kichler
manuals and resources
Kichler
manuals/ resources |
Paradise 100 watt manual Hardwire models Kichler wiring/ pdf Buy: Kichler transformers at Amazon |
Intermatic/ Malibu/ Portfolio/ Moonrays/ Paradise transformers and manuals | |
How to wire Kichler transformerOne wire is always connected to COM terminalChoose which terminal to connect other wire to. 600 watt and 900 watt transformers will have two sets of terminals. Will have two COM terminals etc. Split lighting load into equal parts, so halve of lights are connected to one cable and half to other cable. Then connect each cable to different set of terminals. How to wire Kichler transformer/pdf |
|
Kichler wiring/ pdf Kichler wiring/ pdf |
Example Hardwire transformer wiringKichler sell sheet and wiring/ pdf Compare with Intermatic PX series hardwire transformer See PX series |
Wire chartsChart applies to Intermatic PX series transformer See PX series Kichler will work with any brand wire Buy wire: Kichler 25 feet cable white Kichler 100 feet black 12 gauge at Amazon Low voltage cable / different lengths and gauge /Amazon Coleman cable 12-2 50 foot cable at Amazon Coleman cable 12-2 100 foot cable at Amazon Intermatic 12-2 100 foot cable at Amazon Coleman 250 feet 12-2 at Amazon Buy connectors: Malibu Wire connector at Amazon Malibu connector Paradise connector Moonrays connector at Amazon Universal wire splice at Amazon |
|
Chart applies to Intermatic series 12V transformer See ML series Kichler will work with any brand wire |
E-mail:
geno03245w@gmail.com My response might end up in spam folder, check email folders Site map Follow newest idea on twitter Privacy policy Search |