Specifications of the 250 Watt RENOGY
panels
Maximum Power: 250W
Optimum Operating Voltage (Vmp): 30.1V
Optimum Operating Current (Imp): 8.32A
Panel Ideal resistance at 1000W/m^2 solar isolation = Vmp / 1mp 30.1V
/ 8.32A = 3.617 Ohms (per panel)
Which
element for solar water heater:
the math shows it:
volts x amps = watts
Example: 91 volts x 16 amps = 1456 watts
If your 91 volts drops to 60, then the wattage drops and element
produces less heat
If you connect 1456 watt output to an element rated for 120 volt 900
watts, then element will probably burn up.
If you connect 1456 watt output to an element rated for 120
volt 2500 watts, then element will still produce 1456 watts
heat
If your solar panels generate 145 volts x 15 amp = ?
240 volt x 15 amps = ?
What happens when you connect 240 volt 15 amp electricity to 120 1500
watt element?
The element burns up.
The math shows it:
volts x amps = watts
Example: If
your panels produce 91 volts x 16 amps = 1456 watts (the 91 volts 16
amps will probably burn up the thermostat when direct connected to
water heater so use high voltage design).
If your 91 volts drops to 60 volts in the afternoon, then the wattage
drops and element produces less heat
If you connect 1456 watt output to an element rated for 120 volt 900
watts, then element will probably burn up.
If you connect 1456 watt output to an element rated for 120
volt 2500 watts, then element will still produce 1456 watts
heat.
If you connect 1456 watt output to an element rated for 24 volt 600
watts, then element will burn up.
If your solar panels generate 145 volts x 15 amp = ?
240 volt x 15 amps = ?
What happens when you connect 240 volt 15 amp electricity to 120 1500
watt element?
The element burns up.
Choose
element rated for your output:
Volts and watts are printed on end of each element.
Ordinary elements work fine for AC or DC.
You can connect 100-250 volt 30 amp solar installation
directly to residential water heater... except alterations are needed,
otherwise the thermostat will melt. Read about converting to high voltage DC
In 2017, most local hardware stores do not carry elements rated for low
volt and watt ratings, so you need DC element for those applications.
Single U and double U DC elements, 24 volt 500-900 watts.
The single U
has ordinary element style
with 2 screws for connecting the wires. So your solar panels are
connected directly to
the element.
The double U
element has 4 screws for 4 wires and can accommodate two
separate
connections.... meaning you can have two separate sets of solar panels,
and each set of solar panels can supply power to one of the U 3U elements
are usually made for 3-phase boiler installations, have larger thread,
and will not fit a residential
tank. Buy: DC
elements Single U 24 volt 600 watt element Double U element
Enter Amazon from
my links Amazon As an Amazon Associate I earn from qualifying purchases Enter Amazon from any link on my site, fill cart with any
item ... purchases pay small commission E-mail:geno03245w@gmail.com
My response might end
up in spam folder, check email folders